Does this DIY require welding?
No welding is required.
What tools are needed for this DIY conversion?
You will need a screwdriver, drill and a set of drill bits as well as a 4″ bi-metal hole saw to drill through the bottom of the firebox.
Will this kit work with my Brazos offset smoker?
Yes. This kit is specifically designed for the Brazos.
Will this kit work with my Pecos offset smoker?
Yes. Because of the large wheels on the Pecos, the firebox attachment will need to be position further towards the back in the firebox. Also, for the slide-in stack extension you will need to grind/cut the existing damper off.
Can I use this kit if I don’t have a Brazos or Pecos offset smoker?
Possibly. Depending on your existing offset dimensions, this firebox attachment may be able to work for you. The stack extension more than likely will not work with a different offset than Brazos or Pecos. Reach out with your questions, we may be able to accommodate.
What pellet hopper assembly do I use?
This DIY kit is specifically designed to be used with the 18″ Pellet Pro Elite pellet hopper assembly from Smoke Daddy.
Can I use my existing pellet hopper assembly?
This kit is specifically designed to be used with the Smoke Daddy pellet hopper assembly. Depending upon your current configuration it could possibly fit depending upon the bolt configuration setup.
What’s included in the DIY kit?
The full kit includes:
- The slide-in stack extension with damper
- The firebox attachment
- Bolts and nuts to attach to the firebox
- The stabilizing chain with clip attachments
Will instructions be included?
Yes. Basic instructions will be included with your purchase. You may need to make slight adjustments depending on your smoker.
How long will it take to get my DIY kit?
Once an order has been purchased you should expect to receive the kit within 3 weeks.
Where do I install the temperature probe?
Instructions that come with your DIY Kit will indicate recommended placement for the pellet hopper temperature probe.